Brand:
SATItem NO.:
SATOGP-12.5x10x5-535Order(MOQ):
3000Payment:
EXWProduct Origin:
ChinaColor:
CustomizedShipping Port:
Shenzhen/ Huizhou/ HongkongLead Time:
7-15 DaysSAT Epoxy Resin Amorphous Toroidal Core
SAT epoxy resin amorphous toroidal cores are mechanically hard with a high elastic limit. High saturation flux density and excellent permeability, SAT epoxy resin amorphous toroidal cores are the ideal solution for applications like automobile electronic, soft magnetic sensors, magnetic shielding, winding cores in accelerators or power transformers.
The Specification of Epoxy Resin Magnetic Toroidal Cores
Core design |
Toroidal core |
Core for common mode choke |
12.51005 |
Nominal Dimensions |
12.5x10x5mm |
Core Material |
SATG1K101 |
Type of Finish |
Plastic box / silicon rubber |
Rated Dimensions |
Afe=0.05cm² lFe=3.53cm mFe=1.36g |
Final Inspection |
Magnetical Test Measurement at room temperature (AQL 0,65) Inductance test without DC-magnetisation |
7.1.Measurement of core losses according to MATS-2010A Setting values: B=400mT F=50KHz Specified value: pFe≤120W/kg
7.2.
Measurement of flux density swing from residual flux density into saturation
td=20
µs, |
Epoxy Resin Amorphous Toroidal Core Features:
1. 70% lower core
loss compared to ferrite and silicon steel cores.
2. Lower hysteresis and eddy current losses, higher permeability.
3. Better overload capacity.
4. Environment friendly, lower carbon dioxide emission due to the lower demand
in generation.
5. Lower total cost of manufacturing due to the SAT Zero-Waste Eco
Technology.
6. Short circuit strength increasing due to the tape-wound construction.
7. Smaller size, easier to assemble and repair.
Please leave a message below for more details of amorphous toroidal cores product information.